Magnetic Robot Arm
Robotic arm with a magnetic end-effector for pick-and-place tasks. 7-step build.
MakerCompleted

About this project
This is a five-axis robot arm I designed in Autodesk Fusion and programmed in Mind+. Instead of a traditional claw, it carries a solenoid at the tip, so it picks things up magnetically. The project took me about eight months, through three design iterations and three major versions of the code.
An Arduino Mega 2560 drives five servos, and I control the arm with a PS2 gamepad: the sticks and buttons move each joint, while two buttons switch the solenoid on and off through a relay. The 3D-printed parts use carbon-fiber PLA. The Instructables page has my Fusion files for each version, the parts list, the code and a demo video.
Full write-up on Instructables