Skip to content

Three-axis Robotic Arm

DIY 3-DOF robotic arm built from servos and 3D-printed parts. 6-step build on Instructables.

MakerCompleted

Three-axis Robotic Arm

About this project

I built this arm as the test platform for my research on adaptive grasping, using it to compare fixed settings, vision-based adjustment and tactile feedback on cups made of different materials. Every joint is driven by 35 kg-class servos; the middle and upper arm each use a synchronized pair for extra torque. A two-finger gripper sits at the end.

A Unihiker M10 running Python handles the task flow and strategy, sending serial commands to an Arduino Mega 2560 that drives the servos. I open-sourced the whole design under CC0. The Instructables page has the parts list, CAD and print files, code and a test video, so anyone can rebuild the arm or extend it with new sensors.

Full write-up on Instructables